Motorola AP-51XX - Manual (Page 397)

8-63
AP51xx>admin(network.wan.dyndns)> set
Description:
Sets the access point’s Dynamic DNS configuration.
Syntax:
Example:
admin(network.wan.dyndns)> set mode enable
admin(network.wan.dyndns)> set username percival
admin(network.wan.dyndns)> set password mudskipper
admin(network.wan.dyndns)> set host greengiant
For an overview of the Dynamic DNS options available using the applet (GUI), see Configuring Dynamic DNS on page 5-25 .
set mode enable/disable Enables or disbales the Dynamic DNS service for the access point.
username <name> Enter a 1 - 32 character username for the account used for the access point.
password <password> Enter a 1 - 32 character password for the account used for the access point.
hostname <host> Enter a 1 - 32 character hostname for the account used for the access point.