Motorola AP-51XX - Manual (Page 670)

AP-51xx Access Point Product Reference Guide B-4
• Obtains and applies the expected IP Address from the DHCP Server
• Downloads both the firmware and configuration files from the TFTP Server and updates
both as needed. Verify the file versions within the System Settings screen.
B.1.1.2 Global Options - Using Extended/Standard Options
The following are instructions for automatic firmware and configuration file updates via DHCP using
extended options or standard options configured globally.
The setup example described in this section includes:
• 1 AP-5131 or AP-5181 model access point
• 1 Microsoft Windows DHCP Server
• 1 TFTP Server.
To configure Global options using extended/standard options:
1. Set the Windows DHCP Server and access point on the same Ethernet segment.
2. Configure the Windows based DHCP Server as follows:
a. Highlight the Server Domain Name (for example, apfw.motorola.com). From the Action
menu, select Set Predefined Options.
b. Add the following 3 new options under DHCP Standard Options class:
NOTE If the firmware files are the same, the firmware will not get updated. If
the configuration file name matches the last used configuration file on the
access point or if the configuration file versions are the same, the access
point configuration will not get updated.
Extended Options Code Data type
Access point TFTP Server IP Address
(Note: Use any one option) 181
186 IP address
String
Access point Firmware File Name 187 String
Access point Config File Name
(Note: Use any one option) 129
188 String
String
Standard Options Code Data type
Access point TFTP Server IP Address 66 String