Monster Power HTS 5000 - Manual (Page 26)

20
HTS 5000
MKII
FEATURES
NUMBERS REFER TO DRAWINGS ON PAGE 19
INDEX DRAWINGS
1. Wiring OK LED: Indicates that L-N polarity is correct on the AC outlet that powers the PowerCenter. If the LED is
off, unplug the PowerCenter and consult an electrician.
2. Ground OK LED: Indicates the PowerCenter is plugged into a properly grounded 120V AC power outlet.
3. Surge Protected LED: Indicates Monster Power Surge Protection Circuitry is functioning properly.
4. Clean Power LED: Indicates Monster Clean Power circuitry is functioning.
5. Unswitched On LED: Indicates components plugged into the outlets programmed as “unswitched” are
receiving
AC power.
6. Switched On LED: Indicates components plugged into the outlets programmed as “switched on” will receive AC
power when the ON button is pressed.
7. Timed On LED: Indicates components plugged into the outlets programmed as “switched on after delay” will
receive AC power after a delay.
8. Phone In Use LED: Indicates activities on the phone line.
9. Expanded Scale Volt Meter With Adjustable Illumination: Display incoming voltage in Volts.
10. On Button: Press to turn on outlets programmed as “switched on” or “switched on after delay”.
11. Meter Illumination: Adjusts the brightness of the volt meter.