Monster Power HTS 5000 - Manual (Page 28)

22
NUMBERS REFER TO DRAWINGS ON PAGE 19
16. High Current Audio Filter: For high current audio components such as power amplifiers, special filter circuit to
reduce noise from the AC power line that would degrade the audio performance and to optimize high current demand.
NOTE: It does not harm low current audio, video, or digital components to be connected to the high current
audio outlet section. However, for the best possible performance, we recommend plugging in only high
current audio components here.
17. Cable TV Coaxial Input/Output: The input connects the coaxial cable from a wall cable outlet. The output
connects the coaxial cable to the input of your TV, VCR, or cable box.
18. Satellite Coaxial Input/Output: The input connects the coaxial cable from your satellite dish. The output
connects the coaxial cable to the input of your satellite receiver.
19. Antenna Coaxial Input/Output: The input connects the coaxial cable from your TV antenna. The output
connects the coaxial cable to the input of your TV, VCR, or splitter.
20. Outlet Programming Switches: Enables you to program each outlet pair to be either ”unswitched“,
”switched on“, or ”switched on after delay“.
21. Delay Time Switch: Selects delay time.
22. Trigger Out Programming Switch: Determines whether the 12V remote trigger powers an external device
immediately or after a delay.