Microtek MiniLink - Manual (Page 12)

B. MULTI-CONNECT SYSTEMS (cont’d)
Administration Page (Section E below) manually. If you ordered a complete system with
multiple Client SU WEMs, they have been pre-configured with IP addresses as follows:
Client SU WEM Serial Number IP Address
Unit 1 00511* 192.168.1.201
Unit 2 00512* 192.168.1.202
Unit 3 00553* 192.168.1.203
Unit 4 00624* 192.168.1.204
Unit 5 00714* 192.168.1.205
(*Actual serial numbers will be different)
Note: The lowest serial number of the Client SU WEM you received is pre-configured with IP address
192.168.1.201. The next higher sequential serial number of the Client SU WEMs you received has IP
address 192.168.1.202, etc. If you ordered an additional Client SU WEM separate from your original
order, the default address is 192.168.1.201. The IP address in this additional unit will need to be changed
manually to the next available IP address before installation. An IP address-numbering table is included
in the SYSTEM INSTALLATION NOTES section of this manual on page 17 for your convenience in
keeping track of IP address changes and other notes about your specific application. The green LED on a
multi-connect Host AP will flash to indicate the number of Client SU units connected to it.
WEB PAGES
A. LOGIN
The default user name for each WEM is admin and the password is admin.
Note: The user name and password are case sensitive.
- 9 -