Microtek MiniLink - Manual (Page 17)

D. SECURITY (cont’d)
2. WEP CONFIGURATION
The security page is used for enabling WEP encryption and setting the parameters for WEP
encryption. Click the “Enable WEP” check box to enable (The WPA configuration will be
automatically disabled). After this box is checked, the Default WEP key is available, as are:
Authentication, WEP key lengths and WEP Key 1-4. After updating the settings as desired,
click save to update the WEM. Please note that paired or grouped WEMs must have the same
settings to operate correctly.
- 14 -