Microtek MiniLink - Manual (Page 7)

M
INI
L
INK
W
IRELESS
E
THERNET
S
YSTEM
(WES)
The MiniLink WES is a plug and play CAT5/Ethernet cable replacement device. It operates in the
5.3 and 5.8 GHz U-NII bands on 8 non-overlapping channels. The WES system enables a wide
variety of IP cameras, DVRs, encoders/decoders and web servers to be used across wireless line-of-
sight links in ranges of 500 feet to 30 miles. The system operates independent of any network it
may be connected to.
MINILINK WIRELESS ETHERNET MODULE (WEM)
WEM DESCRIPTION
A. FRONT VIEW B. REAR VIEW
1. LINK ACTIVITY LED
Indicates that a solid Ethernet link is connected between powered Ethernet device & WEM.
1 2 3
NOTE: Horizontal
Ethernet Port is not
available. Mount
WEM so that
Vertical Ethernet
Port is at bottom and
use weatherproof
caps and plugs as
described on pg 7.
4
5
2. POWER LED
Indicates the WEM has power.
3. SIGNAL LEVEL LED
Indicates the signal strength level between WEMs. On the Host AP WEM, indicates the
number of Client SU WEMs connected.
Note: This is not an indication of available throughput.
4. ETHERNET PORT
Standard RJ-45 connector.
5. CHANNEL SELECT
Rotary switch for channel selection, factory set to Channel 0.
Note: Channel positions 0, 1 and 2 are all the same frequency- next available frequency is Channel 3.
C. SIDE VIEW
1. MOUNTING HOLES
(2) ¼ - 20 mounting holes – Attach the outdoor mounting equipment as described in detail on page 7
of this manual.
1
2
3
- 4 -