Section 3 − introduction – Miller Electric IH User Manual
Page 11
Advertising
OM-203 185 Page 7
SECTION 3 − INTRODUCTION
The Induction Heating Temperature Station (IH/TS) is designed to be used with Induction Heating Systems for
pre-heat and post-heat (stress relieving) applications. The station is built in two different configurations; as a controller
only or as a controller with a digital recorder.
The controller in the IH/TS comes pre-programmed from the factory with a typical stress relieving temperature profile
that can be easily changed to match specific customer stress relief requirements. Also, the controller can be
programmed to operate in a pre-heat mode. These instructions will guide the operator in the proper use of the station
which includes programming and setting up the controller, and operating the recorder.
Advertising
This manual is related to the following products: