Maxtor QUICKVIEW 300 - Manual (Page 13)

Introduction
1-4 Quickview 300 80/100/120/160/200/250/300GB PATA
Naming Conventions:
• Host: In general, the system in which the drive resides is
referred to as the host.
1.5 REFERENCES
For additional information about the ATA interface, refer to the latest
revision of the draft standard on the internet at http://www.t13.org/
using the link under “1410D AT Attachment - 6 with Packet Interface
(ATA/ATAPI - 6)and (ATA/ATAPI -7).”