Maxtor QUICKVIEW 300 - Manual (Page 41)

Product Specifications
Quickview 300 80/100/120/160/200/250/300GB PATA 4-9
4.10 Reliability Specifications
Annualized Return Rate
<1.0% Annualized Return Rate (ARR) indicates the average against
products shipped. ARR includes all reasons for returns
(failures, handling, damage, NDF) but does not include
inventory credit returns.
Start/Stop Cycles
50,000 This indicates the average minimum cycles for reliable start/
stop function.
R=0.9998@ >4500, R=0.9995 @ >7500, R=0.5 @ >= 50000
Data Reliability
<1 per 10e15 bits read
Data errors (non-recoverable). Average data error rate
allowed with all errorrecovery features activated.
Component Design Life
5 years (minimum)
Component design life is defined as:
a.) The time period before identified wear-out mechanisms impact the
failure rate.
or
b.) The time period up to the wear-out point when useful component life
expires.
4.11 EMC/EMI
4.11.1 Radiated Electromagnetic Field Emissions - EMC Compliance
The hard disk drive mechanism is designed as a subassembly for
installation into a suitable enclosure and is therefore not subject to
Subpart J of Part 15 of FCC Rules (47CFR15) or the Canadian
Department of Communications Radio Interference Regulations.
Although not required, the disk mechanism has been tested within a
suitable end-use product and found to comply with Class B limits of the
FCC Rules and Regulations of the Canadian Department of
Communications.
The CE Marking indicates conformity with the European Union Low
Voltage Directive (73/23/EEC) when the disk mechanism is installed in
a typical personal computer. Maxtor recommends that testing and
analysis for EMC compliance be performed with the disk mechanism
installed within the user's end-use application.