MRV Communications EM316-2SFP - Manual (Page 30)

EM316-2SFP User Guide
P/N 1259003-001 Rev C3
21
4.4.3 Login Context Commands and Examples
The login context refers to the only CLI state not considered a configuration context. Commands
in this context are generally for system status monitoring. Use the “?” and “list” commands at
the fiberdriver # prompt to display the list of command line options. These help commands
are shown in the slot and port command illustrations later in this section.
A few login context commands are illustrated in this section.
4.4.3.1 “ show version ”
The show version command displays revision levels for the management system
components.
4.4.3.2 “ show log ”
The show log command displays log settings for the management system components.
fiberdriver(config)# show log
Running Level: warning
Nvram Level: disabled
Trap Level: warning
Remote Server: 0.0.0.0
Remote Level: notice
fiberdriver(config)#
fiberdriver# show version
EM316LNXNM-OT v4.0 fdr 52 (May 14 2007 - 13:35:38).
U-Boot 1.0.1 (Jan 25 2005 - 11:08:25).
Linux kernel v2.4.26 (#1 Wed Dec 13 10:36:44 PST 2006).
EM316LNXNM (firmware 5c.13) (00:20:1a:02:53:8f).
MegaVisionJ v2.32k5 - August 24, 2006
Copyright (c) MRV Corp. 1993-2007
fiberdriver#