MRV Communications EM316-2SFP - Manual (Page 47)

EM316-2SFP User Guide
P/N 1259003-001 Rev C3
38
4.4.7.3 “ show ”
The show command displays management and system information related to the
EM316LNXNM-OT management module, the hosting chassis, other modules in the chassis,
and ports available within the managed system. The arguments (parameters) following the
show
command and the operational context displayed by the system prompt control the
many functions available through this command.
The box below illustrates the show command applied with no arguments in the port context
of a 2SFP module with a specific SFP transceiver installed. This display will vary with each
installation.
The CLI help for the show command is identical in the port-level context and the slot-level
contexts. Refer to the Slot-Level Commands section for “show?” and “show ?” information.
fiberdriver(port/1.1.1)# show
Port: 1.1.1
Name: SFP at 1.1.1
Part #/Rev: SFP-DGD-SX/A
Protocol: Transparent
Enable: enable LIN: enable
Link: signal Detect
Nom. BR: 2100
Loopback: off
Serial Number: P6K21R5
Vendor Info: MRV COMM. INC.
Connector: fo LC Medium: multi Mode
Wavelength(nm): 850
TxPower(dBm): -5.066 RxPower(dBm): -6.042 BiasCurrent(mA): 5.008
DDiags: Ok Temp(C): 46 Supply(V): 3.272
fiberdriver(port/1.1.1)#