MRV Communications EM316-2SFP - Manual (Page 36)

EM316-2SFP User Guide
P/N 1259003-001 Rev C3
27
4.4.5.3 Restoring Default Parameters
Use the default command to discard changes applied to the module configuration. The
example below illustrates returning the entire module to the original factory defaults. Use the
“?” after the default command or refer to EM316LNXNM-OT documentation for parameters
to reapply only selected default values including individual port settings.
The command below is applied in the main configuration context. The first command line in
the box opens this context from the login context.
fiberdriver# configure terminal
fiberdriver(config)# default 1 all
Restored default configuration for 1
Restored default configuration for 1.1
Restored default configuration for 1.2
Restored default configuration for 1.2.1
Restored default configuration for 1.2.2
Restored default configuration for 1.3
Restored default configuration for 1.4
Restored default configuration for 1.5
Restored default configuration for 1.6
Restored default configuration for 1.7
Restored default configuration for 1.8
Restored default configuration for 1.9
Restored default configuration for 1.10
Restored default configuration for 1.11
Restored default configuration for 1.12
Restored default configuration for 1.13
Restored default configuration for 1.14
Restored default configuration for 1.15
Restored default configuration for 1.16
fiberdriver(config)#