Memorex MPH6935 - Manual (Page 11)

11
Step 2
(continued)
Connect the base unit
If you want to install the base unit on the wall, see page 33.
1
Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
2
Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.
3
Set the base unit on a desk or tabletop and place the handset in the base unit.
Notes
• Place the power cord where it will not create a trip hazard, or where it could
become chafed and create a fire or electrical hazard.
• Place the handset in the base unit with the keys and display facing upward.
Surge Protectors
It is recommended to use a surge protector for AC and telephone connection.
Lightening and power surges ARE NOT covered under warranty for this product.
MPH6935_OM Eng 3/12/02 3:06 PM Page 11