Memorex MPH6935 - Manual (Page 19)

19
4
Use the number keys to enter the name.
The name cannot exceed 14 characters.
• See the ”Steps for entering names and special characters“, page 20.
• Use the
* / t /TONE and #/ s to move the cursor to the desired position.
• Use the DELETE/CHANNEL key to delete characters as needed.
• Press and hold DELETE/CHANNEL to delete all the characters.
• If a name is not required, go to step 5.
5
Press SELECT .
“ Store Number ” is displayed. The cursor
flashes indicating that the display is ready for the
number to be entered.
6
Use the keypad, * / t /TONE , #/ s , or
REDIAL/PAUSE keys to enter the phone number.
The phone number can be up to 20 digits.
• Use the
REDIAL/PAUSE key to enter pause in
the dialing sequence. The display shows a “ P ”.
Note The pause feature is useful for long distance calling, credit card dialing, or
sequences that require a pause between digits.
• Use the DELETE/CHANNEL key to delete digits as needed.
7
Press SELECT .
The handset beeps and displays the confirmation screen.
The memory storage is complete.
For example if you store a name and number into
memory location number 7, the display shows
“ Memory 7 Stored ”.
After about 2 seconds, “ Memory Store ”
is displayed.
Memory Storing
(continued)
MPH6935_OM Eng 3/12/02 3:07 PM Page 19