Handset ringer and earpiece volume – Memorex MPH6935 User Manual
Page 17
17
Handset Ringer and Earpiece Volume
Handset ringer tone
In the standby mode, press
▲ or ▼.
Each time
▲ or ▼ is pressed, the ringer tone
setting changes and the selected ringer tone
sounds for 2 seconds.
Handset earpiece volume
During a telephone call, pressing
▲ or ▼ will change
the earpiece volume of the handset. This setting will
remain in effect after the telephone call has ended.
When you press
▲ in Maximum mode or press ▼ in Low mode, an error tone sounds.
Ringer Mute
You can temporarily mute the ringer tone. When the handset is off the base and the
phone is ringing, press
OFF
. The ringer tone will return to normal starting with the next
incoming call.
Using the Page Feature
To locate the handset (while it’s off the base)
1
Press
PAGE/FIND
on the base.
2
The handset beeps for 60 seconds.
3
Press any key on the handset or
PAGE/FIND
on
the base, or return the handset to the base to
cancel the page.
MPH6935_OM Eng 3/12/02 3:07 PM Page 17