Step 3 preparing the battery pack – Memorex MPH6935 User Manual
Page 13
13
Step 3
Preparing the battery pack
Charge the battery pack for 15-20 hours before connecting the phone line.
1
Press and slide the battery
compartment cover toward the
bottom of the unit.
2
Connect the battery pack connector
with the correct polarity (black and
red wires), then insert the battery
pack into the battery compartment.
3
Securely close the battery
compartment cover by sliding it up
until it snaps into place.
4
Place the handset in the base
unit with the keys and display
facing upward.
This position lets you see Caller ID
messages on the display.
When the handset has been properly
placed on the charging terminals of
the base unit, the “
CHARGE/IN USE
”
LED of the base unit lights and
charging begins. Charge the battery
for 15-20 hours.
CHARGE/IN USE LED
MPH6935_OM Eng 3/12/02 3:06 PM Page 13