Memorex MPH6935 - Manual (Page 23)

23
Memory Editing
Editing a stored name and/or phone number
1
Press and hold MEMORY until a tone sounds and
“ Memory Store ” is displayed.
2
Press the
▲ or ▼ keys or number keypad to
select the memory location you would like to edit.
3
Press SELECT .
The following screen appears with the memory
location number that you have selected in
the display.
For example, if you selected memory location number 1,
the display shows memory 1 selected.
4
Press the ▲ or ▼ key to select " Edit Memory ",
then press SELECT .
The following screen appears. The cursor flashes
indicating that the display is ready for the name to
be edited.
When a name has not been stored, the cursor
appears at the beginning of the second line.
5
Press the number keys, #/ s , * / t /TONE , or
DELETE/CHANNEL to edit the name. (See page 19.)
To edit only the phone number, skip this step.
6
Press SELECT .
The following screen appears. The cursor flashes
indicating that the display is ready for the number
to be edited.
7
Use the number keypad, #/ s , * / t /TONE ,
REDIAL/PAUSE or DELETE/CHANNEL key to edit
the phone number. The phone number cannot
exceed 20 digits. (See page 19.)
When the phone number is not to be edited, skip
this step.
8
Press SELECT .
The handset beeps and displays the confirmation
screen. The memory storage is complete.
For example if you store a name and number into
memory location number 1, the display shows
“
Memory 1 Stored ”.
After about 2 seconds, “ Memory Store ”
is displayed.
9
Press OFF to return to standby.
MPH6935_OM Eng 3/12/02 3:07 PM Page 23