Memorex MPH6935 - Manual (Page 32)

32
Additional Information
Changing the digital security code
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See
page 8.) In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code as follows.
Note
If the handset battery pack is completely discharged or the battery pack is removed,
the digital security code will be lost. If this happens, a new security code is set
automatically next time the battery pack is charged.
1
Remove the handset from the base unit.
Press and hold
PAGE/FIND .
2
While the handset is emitting the paging
sound, place the handset on the base unit
holding
PAGE/FIND . The paging tone stops.
Leave the handset on the base for more
than 3 seconds.
A random, new security code is set.
MPH6935_OM Eng 3/12/02 3:08 PM Page 32