Motorola SURFboard SVG1501E - Manual (Page 16)

B
1 • Overview 6
Rear Panel
Both the SVG1501 and SVG1501U (shown above) rear panels contain the following
cabling port and connectors:
Item Description
1 TEL1/2
TEL 2
VoIP connection for a single or two-line telephone
VoIP connection for a single-line telephone
2 ETHERNET
1 2 3 4
Use any Ethernet port to connect an Ethernet-equipped computer, hub,
bridge, or switch using an RJ-45 cable.
Activity LED — Green LED defines the activity of the Ethernet connector.
When LED is ON, there is no data traffic and a connection is stabilized.
When LED is FLASHING, data is being transmitted upstream or
downstream.
When LED is OFF, the unit is not powered or there is no Ethernet
connection.
10/100 LED — Indicates the connection data rate.
When Green LED is ON, the connection is at a 100Base-T rate.
When Amber LED is ON, the connection is at a 10Base-T rate.
3 RESET Resets the wireless voice gateway. It may take 5 to 30 minutes to find
and lock on the appropriate communications channels.
Press and hold the RESET button for five seconds or longer to restore the
factory default settings.
4 USB For Windows only, you can use the USB port to connect a PC to the