Motorola SURFboard SVG1501E User Manual

Page 71

Advertising
background image

B

10 • VPN Pages

61

Field

Description

Remote Endpoint Settings

Address group type

Set the remote VPN access group to one of the following
group types:

Single IP address — for one computer, enter the IP address
for the specific computer

IP address range — for a small range of computers, enter the
starting and ending IP addresses for the group of consecutive
IP addresses to have access to the VPN tunnel.

IP Subnet — for an entire subnet/network, enter the Subnet
and Mask

For IP address range and IP Subnet, enter the starting and
ending IP addresses for the group of consecutive IP addresses
to have access to the VPN tunnel.

The remote VPN endpoint on the other side of the tunnel
should match these settings for its local endpoint settings.

Identity

type

Define the remote endpoint identity type to automatically use
the remote endpoint IP address, or as a user-specified IP
address, fully qualified domain name (FQDN), or e-mail
address. This is the identity that the far endpoint uses for
identification of the VPN termination point and handshake.

The remote VPN endpoint on the other side of the tunnel
should match these settings for its local endpoint settings.

Identity

Enter the identity string:

For IP address, enter x.x.x.x.

For FQDN, enter yourdomain.com

For email address identity, enter [email protected]

The remote VPN endpoint on the other side of the tunnel
should match the settings here for its local endpoint settings.

Network address type

Select the remote endpoint’s WAN address type: IP address or
Fully Qualified Domain Name (FQDN)

Remote

Address

Enter either the IP address of the remote endpoint or its
FQDN.

IPsec Settings

Associate one of the two phases of Security Association (SA)
to the VPN tunnel. Phase 1 creates an IKE SA. After Phase 1 is
completed, Phase 2 creates one or more IPSEC SAs, which are
then used to key IPSEC sessions.

Pre-shared

key

Enter the “Pre-shared Key” field if one side of the VPN tunnel
is using a unique firewall identifier (or Pre-shared Key.

Advertising
This manual is related to the following products: