Motorola SURFboard SVG1501E - Manual (Page 59)

B
9 • Wireless Pages 49
Field Description
WPA Pre-Shared Key
Show Key
Sets the WPA Pre-Shared Key (PSK); either an 8-63 ASCII
character string or a 64-digit hex number. This is specified
when the Network Authentication method is WPA-PSK.
Show Key - displays the WPA Pre-Shared Key.
RADIUS Server Sets the RADIUS server IP address to use for client
authentication using the dotted-decimal format
(xxx.xxx.xxx.xxx).
RADIUS Port Sets the UDP port number of the RADIUS server; default is
1812.
RADIUS Key Sets the shared secret for the RADIUS connection; key is a 0
to 255 character ASCII string.
Group Key Rotation Interval Sets the WPA Group Rekey Interval in seconds. Set to zero to
disable periodic rekeying.
WPA/WPA2 Re-auth Interval Sets the amount of time the wireless router can wait before
re-establishing authentication with the CPE.
WEP Encryption Enables or disables Wired Equivalent Privacy encryption.
Shared Key Authentication Sends an authentication request to the access point. Then the
access point sends a challenge text to the CPE.
The CPE encrypts challenge text which it sends to the access
point. The access point decrypts and compares the message
with the original challenge text. If they are the same, the
access point lets the CPE connect; if it does not match, the
access point does not let the CPE connect.
802.1x Authentication Uses a stronger authentication than WEP and can be used in
addition..
Network Key 1 – 4 Sets the static WEP keys when WEP encryption is enabled.
• Enter five ASCII characters or 10 hexadecimal digits for a
64-bit key.
• Enter 13 ASCII characters or 26 hexadecimal digits for a
128-bit key.
When both WPA encryption and WEP encryption are enabled,
only keys 2 and 3 are available for WEP encryption.
Current Network Key Selects the encryption (transmit) key when WEP encryption is
enabled.
PassPhrase Sets the text to use for WEP key generation.