Motorola SURFboard SVG1501E - Manual (Page 43)

B
6 • Advanced Pages 33
Advanced IP Filtering Page
Define which local PCs will be denied access to the SVG1501 WAN by configuring IP
address filters to block Internet traffic to specific network devices on the LAN. You enter
the LSB (Least-significant byte) of the IP address; the upper bytes of the IP address are
set automatically from the SVG1501 Configuration Manager’s IP address.
You can store filter settings commonly used but not have them active.
Field Descriptions for the Advanced IP Filtering Page
Field Description
Start Address Enter the starting IP address range of the computers you want to
deny access to the SVG1501 WAN.
Enter only the least significant byte of the IP address.
End Address Enter the ending IP address range of the computers you want to
deny access to the SVG1501 WAN.
Enter only the least significant byte of the IP address.
Enabled Activate the IP address filter.
Select each range of IP addresses you want to deny access to the
SVG1501 WAN.
Click Apply to activate and save your settings.