Master Lock XR20 - Manual (Page 35)

XR20 Appendix 31
ARMING AND DISARMING AN ALL/PERIMETER SYSTEM
Press Command. The keypad displays PERIM ALL (when arming) or DISARM?. Press
the Select key under the option. The keypad displays ENTER CODE: -.
Present your card to the reader. Once it is validated by the system, both areas arm
or disarm automatically and the Door Strike relay activates.
ARMING AND DISARMING A HOME/AWAY SYSTEM
Home/Away system Arming and Disarming - Present your card to the reader. If the system
is armed, once the card is validated all areas are disarmed.
If the system is disarmed when you present your card, once it is validated all areas are armed
in the AWAY mode.
The system arms or
disarms the areas
and activates the
Door Strike relay.
ENTRY DELAY
All Systems - Once the protected door is opened and the entry delay
starts, the keypad displays ENTER CODE: -. Present your card to the
reader and, once it is validated, the system disarms all areas accessible
by you and activates the Door Strike relay. Area systems provide a delay
to allow selected areas only to be disarmed. See Arming and Disarming
above.
Using the access reader for user menu access
You can also use a card reader to access the User Menu when the MENU?
NO YES display is shown.
The system disarms the areas and activates the Door
Strike relay. Area systems allow a delay for you to
select only certain areas. See Arming and Disarming.
POWER
ABC SECURITY
ENTER CODE: -
Access door is
opened.
POWER
PERIM ALL
DISARM?
or
POWER
ABC SECURITY
FRI 2: 5 1 A M
POWER