Master Lock XR20 - Manual (Page 36)

32 XR20 Appendix
FA113 User's Guide
These instructions guide you through the operation of the XR20
Command Processor system using the FA113 Wireless Keychain
Remote. The FA113 uses the audible output capability of the
Security Command keypad to sound confirmation tones. It is
recommended that you use the FA113 within hearing distance of
these keypads.
Arming a Home/Away or All/Perimeter System
1. Press the ON button once to arm the Perimeter burglary
protection. The Security Command keypads emit a single beep
to confirm the arming. The Perimeter arms and all non-priority
zones not in a normal condition are force armed.
2. After the single beep, press the ON button a second time to arm
the Interior burglary protection. The Security Command
keypads emit two beeps to confirm the arming.
3. After the two beeps, pressing the ON button in Home/Sleep/
Away systems arms the Bedrooms burglary protection. The
Security Command keypads emit three beeps to confirm the
arming.
Disarming a Home/Away or All/Perimeter System
Press the OFF button once. The Security Command keypads emit
a single 2-second beep to confirm the disarming.
Arming an Area System
Press the ON button once to arm the following areas:
1. ___________________ 2. ___________________
3. ___________________ 4. ___________________
The Security Command keypads emit a single beep to confirm the
arming.
Disarming an Area System
Press the OFF button once to disarm the above areas. The keypads
emit a single beep to confirm the disarming.
Using the ALERT Buttons
Pressing the two ALERT buttons simultaneously sends a Panic alarm
to the panel. If your system is monitored by a central station, the
proper authorities will be notified of the alarm.