Magellan GLOBAL SATELLITE TELEPHONE - Manual (Page 113)

WorldPhone – Chapter 5. Appendices B-11
Appendix B – Installation of Voyager Antenna cont’d
Installation of Voyager Antenna cont’d
Mounting on magnetic-holding surface
The Antenna Unit may be attached to the roof top with a magnetic plate inside
the antenna mounting bracket. On a flat, clean metal surface the antenna will
stay in place at highway speeds up to 150 km/hour.
Note! A protection plate is supplied to keep the magnetic plate clean during
shipment of the equipment. Remove the protection plate from the magnetic plate
prior to attaching the Antenna Unit.
See " Assembling the Antenna Unit for magnetic mount ".
The antenna may be loosened by carefully bending a screwdriver as indicated.
Mounting on load carrier
The Antenna Unit may also be attached to the roof using load carrier as indi-
cated. See "
Assembling the Antenna Unit for load carrier mount ".
Antenna Unit
attached with
magnetic plate
Power cable
with 10A fuse
Telephone Unit &
Power Supply
Antenna coax cable
Antenna Unit
mounted on
load carrier