Magellan GLOBAL SATELLITE TELEPHONE - Manual (Page 125)

WorldPhone – Chapter 5. Appendices C-1
Appendix C – Battery charging
Battery charging
Handling
A new battery, or a battery that has not been used for a long time, will
require 2 - 3 charge/discharge cycles to achieve its maximum per-
formance with normal use of the WorldPhone.
To discharge the battery use the phone until it shuts down.
Avoid charging a fully charged or nearly charged battery.
Never leave the battery in hot sunlight. Extreme temperatures may
cause permanent reduction of the battery capacity.
Charging
The charging starts automatically once the universal AC adapter or
the car lighter cable is connected to the power source, and terminates
automatically when the battery is fully charged.
Note! When running the WorldPhone on the universal adapter alone (no
battery installed), the battery symbol in the display is replaced by "DC".
Calibration
To ensure correct monitoring of the battery state, it must be fully
discharged before charging the battery pack for the first time.
5 4 3 2 1
6 7 8 9 10-32VDC TEL FAX ANT DATA
1 6 1 6
Polarity
independent Motor must be running to achieve
full charge of the battery pack
Universal AC Adapter
QBMA 101001-2
15 V DC
90 - 264 V AC
Car lighter cable
QRPM 911062
(option)
Internal power: NiMh rechargeable battery pack
External power/charging
Appendix C (WorldPhone Portable/Provident only) Battery charging
(WorldPhone Portable/Provident only)