Magellan GLOBAL SATELLITE TELEPHONE - Manual (Page 138)

WorldPhone – Chapter 5. Appendices D-10
AT +WINMARSAT ç
lists Inmarsat specific functions supported by the World-
Phone ASD.
AT +WLES = [n] ç
selects the Net service provider for the next outgoing call.
The parameter nnn specifies the Net service provider
Access Code. Three digits must be keyed in. If omitted,
the default Net service provider set from the WorldPhone
is selected.
Range = 0 - 255
nnn = 000, default Net service provider.
AT +WNERAHSHAKE = [n] ç
selects handshake setup.
n = 1 fills the WorldPhone buffer before handshaking with
the Net service provider.
Default n = 0 routes handshake transitions from the PC directly to
the Net service provider. Minimizes transmission
delays when handshake is used seldom.
AT +WRATE = [<sat_rate>] [,<ter_rate>] ç
sets the wanted satellite data rate, and the terrestrial data
rate used for outgoing data calls.
AT +WRATE ? ç
displays selected rates.
AT +WRATE =? ç
displays available rates.
Sat_rate, i.e. requested data rate to use over satellite
channel, for WorldPhone permanently set to:
2400 bps
AT commands cont’d
Appendix D – AT commands cont’d