MITSUBISHI ELECTRIC WD-52627 - Manual (Page 100)

100
Appendices
Outputs
Video:
Video, Qty. 1
Signal Type Video: RCA Pin Plug 1.0 Vp-p, 75 ohm
NTSC 80i only
Audio:
Output, Qty. 2 pairs
RCA Pin Plug, 500 mV rms + 200 mV (full scale) for analog sources
1.5 Vrms + 0.5 Vrms (full scale) for digital sources.
Digital Interfaces:
Digital Audio Output, Qty. 1
RCA Pin Plug, Signal Type, Dolby Digital, PCM
IEEE 139, Qty. 2 IEEE 139 Four Pin type Terminal, S00
Audio/Speakers Qty. 2 woofers 5.5" x 2.2"; Qty. 2 Tweeters 1.5" round
Dimensions:
WD-52627
3" H x 9.6" W x 18.6" D, 121 lbs.
WD-62627 0.5" H x 58.3" W x 20.3" D, 133 lbs.
Power Consumption 295 watts
NetCommand® IEEE 139 System Compatibility:
This television is designed to conform to IEEE 139 AV/C Software standards in effect at the time of development.
This exciting new networking and control technology is designed to provide high-performance digital connections and
product control, making the product easier to use.
Mitsubishi D-VHS VCRs are fully compatible with this TV in audio, video and control. Many DV camcorders that have
IEEE 139 connections will be compatible with the control features of this TV, but not compatible with the audio or
video decoder.
As other manufacturers distribute products that use the IEEE 139 AV/C standards, they will be responsible for
developing products that meet the standards of the technology, as well as compatibility testing with other products.
Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these other
products. Any compatibility problems with other manufacturers’ products should be brought to the attention of those
manufacturers.
The HDMI input is compliant with EIA-861B standards for standard, extended and high definition video, digital audio
and HDCP copy protection. HDMI input 1, however, is not intended for use with personal computers or devices
outputting video signals with computer resolutions.
Appendix B: Specifications, continued