Operation of pip, Changing pip device, Changing pip/side-by-side channels – MITSUBISHI ELECTRIC WD-52627 User Manual

Page 82: Exchanging program images, Moving pip image, Freezing the pip and side-by-side pictures

Advertising
background image

82

Chapter 6. Additional Features

Press PIP to activate the PIP option. With each press of
the PIP button on the TV remote control (within seconds
of each other), the PIP will cycle through the following
display options:

MAIN

PICTURE

Side-by-Side

• Side-by-side

pictures

PIP Ant-1 17

Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1

PIP

• PIP

(available for PC
viewing)

Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1

• PIP off

To turn PIP off, wait at least 10 seconds and then press

PIP. The next time you activate PIP, the last-used PIP
option will be displayed.

Changing PIP Device

When PIP is displayed, press PIP DEVICE to change the
PIP picture source device. A menu similar to the Device
Selection menu will be displayed.

Changing PIP/Side-by-Side Channels

Press PIP CH to scroll up and down through memorized
channels on ANT-1 and ANT-2.

Exchanging Program Images

Press EXCH to exchange the main picture and the PIP
picture. Pictures from digital channels can only be

Operation of PIP

shown as the main picture. PC images can only be the
main image.

Moving PIP Image

If no menus are on screen, press ADJUST , , , or to
move the PIP display anywhere on the main screen.

Freezing the PIP and Side-by-Side
Pictures

Press PAUSE to freeze the PIP and side-by-side images.
Press PAUSE again to return to a “live” image.

You can display programs from analog channels, analog inputs, or devices as Picture-In-Picture (PIP). The TV has
a second analog tuner for non-scrambled analog channels received on ANT-1 and will display them as the PIP sub-
pictures. Digital channels and devices can be shown as the main picture but cannot be the sub-picture.

PC screens can

be viewed as the main picture with large PIP.

IMPORTANT

• The side-by-side option cannot show the

same channel or device on both sides.

• If ANT-1 or ANT-2 is the main picture, ANT-

2 is not available as a PIP or side-by-side

image.

• PIP is not compatible with signals from

media cards.

• You can view only one HDMI input at a

time with the PIP or side-by-side feature.

Advertising
This manual is related to the following products: