MITSUBISHI ELECTRIC WD-52627 - Manual (Page 14)

1
Chapter 1. Television Overview
Remote Control
Overview
Figure 1, following page
1. Slide Switch: Selects A/V product to be controlled
by the remote control. Select TV for NetCommand®
device control.
2. Numbers: Individually select channels or enter
information into menus.
3. POWER: Turns power on and off for TV and other
A/V products.
. GUIDE: Displays or removes TV Guide On Screen or
ChannelView for ANT-1 and 2. Displays Track List for
A/V Disc. Displays program guide for satellite receiver,
or DVD Disc menu. Displays thumbnails or play lists
for media card files.
5. SQV (SuperQuickView™): Scans through
memorized lists of favorite channels.
6. QV (QuickView™): Switches between the current
channel and last channel viewed.
7. SLEEP: Sets the TV to turn off within 2 hours. See
next page for setup instructions.
8. VIDEO: Selects and adjusts individual video settings.
9. DEVICE: Displays the Device Selection menu to
select the device to view (ANT-1 and ANT-2, or
devices connected to the TV’s inputs, including IEEE
1394 devices).
10. CH(ANNEL)/PAGE: Scans up or down through
memorized channels. When used with TV Guide
On Screen® and ChannelView, pages up and down
through screens.
11. VOLUME: Changes sound level.
12. AUDIO: Selects and adjusts individual audio settings.
13. MUTE: Turns sound on or off.
1. Light: Located on the left side of the remote control,
this feature illuminates buttons or labels.
15. ENTER/EXCH: Selects a channel number or menu
item. Exchange PIP and main TV picture. If PIP is
displayed, it must be cancelled before using the on-
screen menus for devices.
16. ADJUST: Press to navigate TV Guide On
Screen, menus, change settings, and move the PIP
on-screen location. Operates many NetCommand
functions.
17. SUB/CANCEL: Clears SQV and some menu entries
and cancels recordings. For digital channels, adds
separator between major and sub channel numbers.
18. TV MENU: Displays on-screen menu system.
19. DEVICE MENU: Displays or removes the options menu
for TV Guide On Screen. Displays the menu for devices
connected to the TV, including CableCARD™. For VCR
or DVDs, the first press displays the transport menu, the
second press displays the VCR or DVD menu.
20. V-CHIP: Turns On or Off the V-Chip Lock.
21. PIP: Turns on PIP and cycles through PIP display
choices.
22. PIP CH: Scrolls up or down through memorized
channels for PIP
23. HOME: Exits TV on-screen menus and the TV Guide
On Screen system and returns to TV viewing.
2. FORMAT: Changes the shape and size of the main TV
picture.
25. PIP DEVICE: Displays PIP Selection menu to select
the PIP image source device
26. INFO: First press displays an on-screen summary
of the current device used and any broadcast
information available (including current V-Chip
information). See Appendix D for details. While in the
TV Guide On Screen system, press the info button to
cycle through the available info box sizes.
27. REC (Record)/CONNECT: Displays the Record
menu for setting up recordings. Records with a VCR,
sets up recordings for DVCR, IEEE 1394 devices, or
while in ChannelView. When Listings screen for TV
Guide On Screen is displayed, will start a recording.
CONNECT: Initiates IEEE 1394 peer-to-peer
connections.
28. STOP: Stops a VCR, DVD, A/V Disc or media card file.
29. PAUSE: Pauses a live TV picture when no PIP image is
displayed. When PIP image is visible, pauses that image.
Pauses a VCR, DVD or A/V Disc, media card file.
30. REW/REV: Rewinds a VCR. Reverses scan with a DVD,
A/V Disc or media card file.
31. PLAY: Plays a VCR, DVD, A/V Disc or media card file.
32. FF/FWD: Fast forward a VCR or media card file, or fast
play a DVD.