Moxa Technologies DE-308 - Manual (Page 117)

Installation and Configuration
NPort Server Pro User’s Manual
7-13
Monitor
Once a configuration has been set up, or a configuration file has been loaded, NPort Server Monitor
will automatically start monitoring servers and ports. Refer to the figure below for an example of the
type of monitoring information that will be displayed. (Check the Help menu to find additional
information about using this program.)
NPort Server Monitor will use different colors to indicate the status of the ports.
— Black means that the port is currently hooked up to your LAN and is active.
— Red means that the port is currently not accessible. It could either be inactive,
removed from the LAN, or have a routing error.
— Pink means that two or more NPort Server Pros have been assigned the same IP
address. You must use NPort Pro Manager to rectify the situation.