Changing your installation type – Moxa Technologies DE-308 User Manual

Page 131

Advertising
background image

NPort Server Pro User’s Manual 8-1

8

8

8.

Changing Your Installation Type

This chapter describes how to change between the three application modes — Single-Host, Multi-Host,
and Custom—after installation. The only way to change from one application mode to another is to
rerun the driver/software Setup program

If you started off by installing your server as Single-Host, you will have noticed, for one thing, that it
is not possible to change the server’s IP address from this application type. If at some point during the
server’s operation you find it necessary to change the IP address, share the ports with another
NT/95/98 server, or initiate some type of remote control function, you will need to change to a
different application mode.

Note that changing between application types will not automatically wipe out previously set
configurations. Be sure to select the correct mode for your application. See chapter 2 of this manual
for details.

.

Note: To change to a different application mode, you will need to rerun the Setup program.

See chapter 4 to install Single-Host, chapter 5 to install Multi-Host, and chapter 6 to
install Custom.

Advertising
This manual is related to the following products: