Configuring through view by ip – Moxa Technologies DE-308 User Manual

Page 91

Advertising
background image

Setting Up Custom

NPort Server Pro User’s Manual

6-19

.

Note: When adding access permission, you may either view the access control list by Port,

or by IP address. These two approaches also apply to the procedure for adding new
hosts. The next two sections describe how to add hosts using both approaches.

Configuring Through View by IP

Using the view access control list by IP address option displays the access control list by giving the
server IP addresses. It is clear to see which IP addresses have been granted access to which ports, and
which IP addresses are allowed onto the server.

Adding Access Permission of One Host

If a particular host is permitted access to all ports on a specific server, we recommend that you
configure using the view access control list by IP address option.

1.

Click on the Access Control tab, and then select the IP address option next to View
access control list by:

2.

Click on the Server you would like to modify.

3.

Click on Add IP to open the Grant Access IP window.

4.

To add access for only one computer, select a single computer, and then enter the
host’s IP address in the appropriate text box.

To add access for a group of computers, select a group of computer, and then enter the IP
address and netmask. (E.g., for network class C computers, you might enter 192.168.1.0 for
IP address and then 255.255.255.0 for netmask.)

Advertising
This manual is related to the following products: