Moxa Technologies DE-308 - Manual (Page 23)

IP Address Configuration
NPort Server Pro User’s Manual
3-3
4. A connection between your computer and NPort Server Pro should now be established,
and the MOXA NPort Server Pro utility program will automatically start running.
.
Note: After activating the Telnet console, use the following procedure to make sure that the
VT100 Arrows option is selected. Not doing so could cause the server’s name to be
changed inadvertently.
5. Choose Preferences from the Telnet Console Terminal menu.
6. Make sure that the VT100 Arrows box in the lower left hand corner of the window is
checked, and then click OK to return to the Telnet Console window.
7. Use the keyboard arrow keys to highlight [serverConfig] as shown below, and then
press Enter to select this option.