Moxa Technologies DE-308 - Manual (Page 124)

7-20
NPort Server Pro User’s Manual
o The items described below which are check marked will be tested.
o Tx n Rx: Displays test result of transmitting and receiving data between two
ports.
o RTS g CTS: Displays test result of the RTS and CTS signals between two ports.
o DTR g DSR: Displays test result of the DTR and DSR signal between two ports.
o DTR g DCD: Displays test result of the DTR and DCD signal between two
ports.
Communication Parameters Selection
1. Click on the Communication Parameters tab to set up communication parameters.
2. Set Baud rate, Data bits, Parity, and Stop bits, to the appropriate values.