Moxa Technologies DE-308 - Manual (Page 68)

5-22
NPort Server Pro User’s Manual
3. Click on Remove , and then click OK to exit. As you can see from the window shown
below, Port 3 has been removed from the host’s access control.
Removing a Granted Host
If you do not allow a particular host to use any of the ports, simply remove the host from the list.
.
Note: If you empty the access control list, then by default, only the connecting host’s IP
address is granted.
1. Click on the host’s IP address to highlight it.
2. Click on the Remove button, and then click OK to exit.