Settings menu, Sound and alert settings – Mitel 5603 User Manual
Page 42
5603 Wireless Handset User Guide
36
Settings Menu
1.
Enter the menu by pressing the “Menu” soft key.
2.
Select
in the menu.
Sound and Alert Settings
Adjust the Ringer Volume
1.
Select "Sound & Alerts".
2.
Select “Volume”.
3.
Adjust the volume by using
and
on the navigation key.
4.
Press "Back" to save the setting.
Select Ring Signals
1.
Select "Ring signals".
2.
Select "Internal call", "External Call", or "Callback"
1
.
3.
Press "Select".
4.
Select ring signal. It is possible to listen to the selected ring signal by pressing the "Play"
soft key. The ring signal will be repeated until the "Stop" soft key is pressed.
5.
Press "Select".
Turn the Vibrator on/off
1.
Select “Vibrator alert”.
2.
Select “On”, “On if silent” (i.e. the vibrator is on when the handset is muted), or “Off”.
3.
Press "Select".
4.
Press "Back" to save the setting.
Set the Key Sound
This means that every time a key is used, a low sound is heard.
1.
Select “Key sound”.
2.
Select “Silent, “Click”, or “Tone”.
3.
Press "Back".
It is possible to listen to the key sound by pressing the "Play" soft key.
1. "Callback" is only applicable if defined in the PDM/WSM.