Mitel 5603 - Manual (Page 47)

5603 Wireless Handset User Guide
41
System
Change System
Select “Automatic” or a specific system. If the handset is set to “Automatic” it selects a system
according to the priority list, see “Priority” on page 42.
Subscribe System
The handset can subscribe up to eight different systems. To subscribe a new system, the “Park:”
(Portable Access Right Key) and “Ac:” (Authentication code) related to the system that will be
log on to are needed. Contact your system administrator for more information.
The IPEI code is a unique code which has been assigned to the handset, see also “Admin
Menu” on page 43.
1. Enter System name. Press "next".
2. Enter PARK code. The PARK code may not be needed if there is no alien DECT system
within the coverage area.
3. Enter AC code. Press "Next".
An information text "Protection on?" is displayed.
4. Select "Yes" if the new system needs to be protected. It is not possible to delete a protected
subscription from the System menu
1
.
5. Press "OK". A searching mode starts.
Unsubscribe System
1. Select "Unsubscribe"
1
.
2. Select the system to unsubscribe in the list.
3. Press "Select".
4. Press "Yes" to unsubscribe the system. Otherwise, press "No".
Rename System
It is possible to change the name of the system in the handset.
1. Select "Rename System".
2. Select system to rename.
3. Press "Edit"
4. Enter new name.
5. Select "Save".
Note: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
1. It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the Admin
menu or the DECT system.