Motorola LS3578 - Manual (Page 30)

2 - 2 Symbol LS3578 Product Reference Guide
Short high-low beeps Scanner has unpaired with the cradle.
Note: When connected to a remote device using SPP or HID, if a
disconnect beep sequence sounds immediately after scanning a
bar code, check the host device to determine if it received the
transmitted data. The scanner may have transmitted the last bar
code scanned after losing the connection.
Long low-long high beeps Unsuccessful pairing attempt. See Auto-reconnect Feature on
page 4-15 .
Long low-long high-long low-long high
beeps Remote device rejected connection attempt, possibly due to an
attempt to pair with a cradle that is already paired with the
maximum number of scanners.
Four long low beeps 1. A transmission error was detected in a scanned symbol. The
data is ignored. This occurs if a unit is not properly configured.
Check option setting.
2. When communicating with a cradle, the cradle acknowledges
receipt of data. If the acknowledgment is not received, this
transmission error beep sequence sounds. Data may still have
been received by the host. Check the host system for receipt of
transmitted data. If data was not received by the host, re-scan the
bar code.
Five high beeps Emitted every 5 seconds while a reconnection attempt is in
progress. See
Auto-reconnect Feature on page 4-15 .
Parameter Menu Scanning
Short high beep Correct entry scanned or correct menu sequence performed.
Long low-long high beeps Input error; incorrect bar code, programming sequence, or Cancel
scanned. Scanner remains in program mode.
Short high-short low beeps Keyboard parameter selected. Enter value using numeric bar
codes.
Short high-short low-short high-short low
beeps Successful program exit with change in the parameter setting.
Long low-long high-long low-long high
beeps Out of host parameter storage space. See Default Parameters on
page 5-4 .
ADF Programming Normal Data Entry
High-low beeps Enter another digit. Add leading zeros to the front if necessary.
Low-low beeps Enter another alphabetic character or scan the End of Message
bar code.
High-high beeps Enter another criterion or action, or scan the Save Rule bar code.
High-low-high-low beeps Rule saved. Rule entry mode exited.
High-low-low beeps All criteria or actions cleared for current rule, continue entering
rule.
Table 2-1 Standard Beeper Definitions (Continued)
Beeper Sequence Indication