Motorola LS3578 - Manual (Page 324)

A - 2 Symbol LS3578 Product Reference Guide
Parameter Broadcast (Cradle Host Only) Enable 4-21
Pairing Modes Unlocked 4-22
Pairing on Contacts Disable 4-23
Connection Maintenance Interval 15 min 4-24
Authentication Disable 4-27
Pin Code Static 4-28
Encryption Disable 4-29
User Preferences
Default Parameters Restore Defaults 5-4
Beeper Tone Medium 5-5
Beeper Volume High 5-6
Laser On Time 3.0 sec 5-7
Beep After Good Decode Enable 5-7
Trigger Mode Level 5-8
Aim Duration 0.0 sec 5-9
Beep on Insertion Enable 5-9
Time Delay to Reduced Power Mode 1 Second 5-10
Transmit Code ID Character None 5-11
Scan Angle Normal Angle 5-11
Prefix Value 7013 <CR><LF> 5-12
Suffix Value 7013 <CR><LF> 5-12
Scan Data Transmission Format Data As Is 5-13
FN1 Substitution Values Set FN1 Substitution Value 5-15
Transmit “No Read” Message Disable No Read 5-15
Synapse Interface Standard Synapse
Connection 5-16
Batch Mode Normal (Do Not Batch Data) 5-17
Report Scanner Version 5-19
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.