MGE UPS Systems EPS 6000 User Manual
Page 33
Pushbuttons
Following are brief descriptions of the function of the alphanumeric display
pushbuttons.
Figure
A l p h a n u m e r i c D i s p l ay a n d C o n t ro l s
2-6
ø
Settings pushbutton
This pushbutton is used to select the display language and adjust the LCD screen
contrast for optimal viewing.
˘
Pushbutton
This pushbutton primarily allows the selection of which UPS module or SSC the
display communicates with; it may also serve to indicate selection, negative
response, and other functions, depending on the displayed message.
◊
Pushbutton
This pushbutton provides access to voltage measurements, including:
•
Main AC input (mains 1) phase-to-phase voltage
•
Bypass AC input (mains 2) phase-to-neutral and phase-to-phase voltage
•
Inverter output phase-to-neutral and phase-to-phase voltage
•
Load phase-to-neutral and phase-to-phase voltage
Å
Pushbutton
This pushbutton provides access to current measurements, including:
•
Main AC input (mains 1) current
•
Bypass AC input (mains 2) current
LCD
display
Settings
pushbutton
˘
pushbutton
8
7
6
5
4
3
2
1
+ –
!
W.Hz
A
V
*
LOAD IS PROTECTED
UPS IS ON LINE
2 — 7
Operation
User’s guide