MGE UPS Systems EPS 6000 - Manual (Page 34)

• Inverter current
• Load current
• Percent current drawn by the load relative to UPS module or SSC rating
• Crest factor per phase
„
Pushbutton
This pushbutton provides access to power and
frequency measurements, including:
• Main AC input (mains 1) frequency
• Bypass AC input (mains 2) frequency
• Inverter frequency
• Power drawn by the load (in kW and kVA)
• Load power factor
ı
Battery pushbutton
This pushbutton provides access to battery measurements, including:
• Battery voltage
• Battery current
• Battery ambient temperature
• Battery time available
• Battery time remaining
⁄
Alarms pushbutton
This pushbutton is used to display current alarms, or to display stored alarms.
If the alarm key is pressed repeatedly, the display will scroll through the stored
alarm record, returning to the latest after the oldest is shown.
If a blinking character (!) appears in the display, the user may press the Alarm
pushbutton again to scroll through additional useful information.
Ø
pushbutton
This pushbutton is reserved for future use.
°
Pushbutton
Depending on the displayed message, this pushbutton may serve to indicate confir-
mation, positive response, and other functions.
2 — 8 Operation
EPS 6000 UPS Shared Systems