MGE UPS Systems EPS 6000 - Manual (Page 52)

The LCD can display comprehensive information about
UPS performance through its monitoring functions.
To display voltage measurements, press the “V” key on the
keyboard, as shown in Figure 2-22.
Figure Vo l t a g e M e a s u r e m e n t s
2-22 Select voltage measurements by
pressing the
◊
pushbutton
INPUT VAB VBC VCA
V RMS
BYPASS VAN VBN VCN
V RMS
BYPASS VAB VBC VCA
V RMS
INV. VAN VBN VCN
V RMS
INV. VAB VBC VCA
V RMS
LOAD VAN VBN VCN
V RMS
LOAD VAB VBC VCA
V RMS
◊
◊
◊
◊
◊
◊
◊
◊
Main input (mains 1) phase-to-phase voltages
in VAC RMS.
Bypass input (mains 2) phase-to-neutral
voltages in VAC RMS.
Bypass input (mains 2) phase-to- phase
voltages in VAC RMS.
Inverter output phase-to-neutral voltages in
VAC RMS.
Inverter output phase-to-phase voltages in
VAC RMS.
Load phase-to-neutral voltages in VAC RMS.
Load phase-to-phase voltages in VAC RMS.
(Only in UPS modules)
(only in SSC)
(only in SSC)
(only in UPS modules)
(only in UPS modules)
2.3.3.1 Voltage
Measurements
2.3.3 Measurements
2 — 26 Operation
EPS 6000 UPS Shared Systems