MGE UPS Systems EPS 6000 - Manual (Page 54)

To display power or frequency measurements, press the
“W.Hz” key on the keyboard, as shown in Figure 2-24.
Figure Po w e r a n d F r e q u e n c y M e a s u r e m e n t s
2-24 Select power and frequency measurements
by pressing the
„
pushbutton.
FREQ. INP. BYP. INV.
HZ
LOAD P1 P2 P3
KW
P. TOTAL P.KW P.KVA
LOAD
POWER FACTOR
LOAD P.F. =
P LOAD / Pn
= %
LOAD P1 P2 P3
KVA
(PN= KW)
„
„
„
„
„
„
„
Frequency in Hertz for the main input (mains 1),
bypass input (mains 2), and inverter output.
Real power drawn by the load in kilowatts, for
each phase.
Percentage of real power drawn by the load,
relative to the rated output of the UPS module or
SSC.
Apparent power in kVA drawn by the load for
each phase.
Total real power (in kW) and apparent power (in
kVA) drawn by the load.
Load power factor (real power divided by
apparent power)
2.3.3.3 Power and
Frequency
Measurements
2 — 28 Operation
EPS 6000 UPS Shared Systems