Maxon Telecom WL7-VERS. C - Manual (Page 53)

PATENTS PENDING 53
11921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
3. If the inboard rollstop does not line up
correctly with the edge of the base plate
(FIGS.
53 -1 and 53 -2), go to IN-
STRUCTION 4.
4. Turn power switch OFF (FIG. 53 -3).
TURNING POWER SWITCH ON/OFF
(LH PUMP SHOWN)
FIG. 53-3
POWER
SWITCH
CONTROLLER
(REF)
INBOARD ROLLSTOP OVERLAPS
EDGE OF BASE PLATE
FIG. 53-1
INBOARD ROLLSTOP WITH GAP
BETWEEN BASE PLATE
FIG. 53-2
THRESHOLD
PLATE
EDGE OF
BASE PLATE
THRESHOLD
PLATE
EDGE OF
BASE PLATE
NOTE: The power switch on the Lift
must be turned OFF before
entering SETUP.
EDGE OF
INBOARD
ROLLSTOP
EDGE OF
INBOARD
ROLLSTOP