Maxon Telecom WL7-VERS. C - Manual (Page 56)

PATENTS PENDING 56
11921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
9. Lower the platform until the inboard
rollstop is in the up and locked posi-
tion. Next, raise the platform to fl oor
level (FIG. 56-1A). Verify that the
inboard rollstop lines up with the
edge of the base plate as shown in
FIG 56-1B. If necessary, repeat
this entire procedure.
INBOARD ROLLSTOP LINES
UP WITH BASE PLATE
FIG. 56-1B
PLATFORM AT FLOOR LEVEL
(LH SIDE SHOWN)
FIG. 56-1A
PLATFORM
LIGHT
INBOARD
ROLLSTOP
THRESHOLD
PLATE
EDGE OF
BASE PLATE
FLOOR POSITION ADJUSTMENT - Continued