Cabling and startup for a single user – Motorola SB4200 User Manual
Page 17
12
X
Home
Exit
Introduction
Before You Begin
Installation
Configuration
Troubleshooting
Legal
Cabling and Startup for a Single User
6
Connect your computer to the SB4200 using one of the following methods:
USB
Ensure the SB4200 CD-ROM is inserted into your CD-ROM drive. The CD-ROM
must be in the drive before plugging in the USB cable.
Connect the USB cable to the SB4200 port marked USB and the other end to the
USB port on the back of your computer.
For Windows 98 USB users, go to the next page.
For Windows 2000 and Windows Me USB users, go to page 18.
Ethernet
Connect the 10/100Base-T shielded Ethernet cable to the SB4200 Ethernet
connector and the other end to the Ethernet jack on the back of your computer. For
an Ethernet connection, skip over the USB instructions and go to
“Configuring for TCP/IP.”
During normal operation, the Power, Receive, Send, and Online lights are on and
the Activity light flashes when transferring data between the SB4200 and your
computer.