Motorola SB4200 - Manual (Page 9)

X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
4
5
6
4
7
1
2
3
Rear Panel
The rear panel provides cabling connectors, status lights, and the power receptacle.
Item Description
1 LINK/ACT When the light is on, the Ethernet connection is available. A blinking
light indicates data is being transferred.
2 This port is the Ethernet connector that transfers data to and from
your computer.
3 100 The light is on when a 100Base-T link is established and off when a
10Base-T link is established.
4 USB This port provides a direct connection to USB equipped computers.
5 • This is the recessed reset button.
6 CABLE This port transfers data to and from the service provider.
7 POWER This connector provides power to the SB4200.