Motorola SB4200 - Manual (Page 20)

15 X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
Setting Up a USB Driver in Windows 98
If your computer does not locate the driver, the previous window is displayed again.
You should select Specify a location and type in the location of your CD-ROM
drive as shown in the upper window.
3 Click Next.
Note: If the window on the lower left of this page is not displayed, verify that the Motorola
CD-ROM is in the drive and accessible. If you still cannot find the correct driver file, then
cancel the installation and remove invalid entries as described in Example 1 and/or
Example 2 found under the heading called “Recovery After Installation Errors with
Win98_SE and Windows 98” starting on page 48.
4 Select The updated driver. . . and then click Next.